Skip to content

Documentation / @interstellar-tools/maps / tipOverAngle

Function: tipOverAngle() ​

ts
function tipOverAngle(rFootprint: number, hCoM: number): Radians;

Defined in: landing/tip-over-angle.ts:59

Compute the tip-over angle of a lander: the tilt at which its centre of mass passes over the edge of its footprint.

θtip=arctan⁡rfootprinthCoM

Where:

  • rfootprint is the horizontal distance from the vertical through the centre of mass to the edge it would tip over (m)
  • hCoM is the height of the centre of mass above the ground (m)

Units

  • Inputs: rFootprint and hCoM in m.
  • Output: θtip in radians, in (0, π/2).

Notes

  • Tilt the lander past this angle and gravity rolls it over instead of back: a wide stance and a low centre of mass make it larger.
  • For legs on a circle, the weakest direction is between two legs: with n legs at radius R, the edge is Rcos⁡(π/n) from the centre, so R/2 for four legs and R/2 for three.
  • A static check. Touchdown speed, leg stroke, friction and a sliding footpad all change the real limit; see isStableLanding.
In practiceApollo 11, Eagle on the Moon

40.1°

Tipping between two of the lunar module's four legs, with the centre of mass 3.57 m up

The footpads sat 4.256 m (167.57 in) from the lunar module's axis, so the edge between two of them was 3.010 m out. At touchdown the centre of mass was 140.7 in above the footpad soles, with the struts unstroked (stations 213.5 and 72.84 in). Eagle came to rest tilted 4.5°, and the postflight simulation put the rock-up at about 2°: 6.5° in all, against a limit of 40.1°. The gear was designed for an effective slope of up to 12°. Tipping over a single footpad would take 50.0°.

ts
const R = 167.57 * 0.0254; // m, footpad centre from the axis
const h = (213.5 - 72.84) * 0.0254; // m, centre of mass above the soles
tipOverAngle(R * Math.cos(Math.PI / 4), h); // ≈ 40.1°

Parameters ​

ParameterTypeDescription
rFootprintnumberDistance rfootprint from the centre of mass to the tipping edge, horizontally, in m (finite, > 0).
hCoMnumberHeight hCoM of the centre of mass above the ground in m (finite, > 0).

Returns ​

Radians

The tip-over angle θtip in radians.

Throws ​

  • If any input is not a finite number.
  • If any input is <= 0.

Example ​

ts
// A stance as wide as the centre of mass is high tips at 45°
tipOverAngle(2, 2); // π/4

See ​

isStableLanding