Skip to content

Documentation / @interstellar-tools/equations / ballisticPeakDeceleration

Function: ballisticPeakDeceleration() ​

ts
function ballisticPeakDeceleration(
  VE: number,
  gamma: number,
  H: number
): number;

Defined in: entry/ballistic-peak-deceleration.ts:68

Compute the peak deceleration of a ballistic entry, with the Allen–Eggers solution.

amax=VE2sin⁡|γ|2eH

reached when the speed has fallen to VE/e≈0.61VE.

Where:

  • VE is the speed at entry (m/s)
  • γ is the flight-path angle (rad)
  • H is the atmosphere's scale height (m)
  • e is Euler's number

Units

  • Inputs: VE in m/s, gamma in radians, H in m.
  • Output: amax in m/s². Divide by 9.80665 for g.

Notes

  • The peak doesn't depend on the vehicle's mass, size or drag: a heavier one just reaches it lower down. Only the entry speed and angle matter.
  • It grows with sin⁡|γ|: a steeper entry is a harder one.
  • Same assumptions as ballisticEntrySpeed: no lift, no gravity, a straight path. A lifting entry spreads the deceleration out and peaks much lower.
In practiceApollo 11, coming home

35.8 g

A ballistic entry at 11.03 km/s and −6.48°, with H = 7.2 km

The crew felt 6.56 g at the peak. The command module flew with lift, banking to control it, so it slowed down more gradually than a ballistic body would.

ts
ballisticPeakDeceleration(11_032, toRad(-6.48), 7200) / 9.80665; // ≈ 35.8 g

Parameters ​

ParameterTypeDescription
VEnumberEntry speed VE in m/s (finite, > 0).
gammanumberFlight-path angle γ in radians (finite, non-zero, within [-π/2, π/2]).
HnumberScale height H in m (finite, > 0).

Returns ​

number

Peak deceleration amax in m/s².

Throws ​

  • If any input is not a finite number.
  • If VE <= 0, H <= 0, or gamma is zero or past vertical.

Example ​

ts
import type { Radians } from '@interstellar-tools/types';

// Entering at 7.8 km/s, 2° below horizontal
const a = ballisticPeakDeceleration(
  7800,
  ((-2 * Math.PI) / 180) as Radians,
  7200
);
// a ≈ 54 m/s², about 5.5 g

See ​