Skip to content

Documentation / @interstellar-tools/equations / stagnationHeatFlux

Function: stagnationHeatFlux() ​

ts
function stagnationHeatFlux(
  rho: number,
  V: number,
  Rn: number,
  k?: number
): number;

Defined in: entry/stagnation-heat-flux.ts:47

Compute the convective heat flux at the stagnation point of an entry vehicle, with the Sutton–Graves relation.

q˙=kρRnV3

Where:

  • ρ is the free-stream density (kg/m³)
  • Rn is the nose radius: the radius of curvature at the stagnation point (m)
  • V is the speed (m/s)
  • k depends on the atmosphere's composition: about 1.7415×10−4 kg1/2/m for Earth's air and 1.9027×10−4 for Mars

Units

  • Inputs: rho in kg/m³, V in m/s, Rn in m, k in kg^½/m.
  • Output: q˙ in W/m².

Notes

  • The V3 is why returning from the Moon is so much harder on a heat shield than returning from Earth orbit: 11 km/s against 7.8 km/s is almost three times the heating.
  • A blunter nose (larger Rn) heats less, which is why capsules have broad, rounded heat shields rather than sharp points.
  • Convective heating only. At lunar return speeds the hot shock layer also radiates, which this doesn't include.

Parameters ​

ParameterTypeDefault valueDescription
rhonumberundefinedFree-stream density ρ in kg/m³ (finite, > 0).
VnumberundefinedSpeed V in m/s (finite, > 0).
RnnumberundefinedNose radius Rn in m (finite, > 0).
k?number1.7415e-4Sutton–Graves constant k (finite, > 0). Defaults to 1.7415e-4, for Earth.

Returns ​

number

Stagnation-point heat flux q˙ in W/m².

Throws ​

  • If any input is not a finite number.
  • If any input is <= 0.

Example ​

ts
// 11 km/s at about 60 km (ρ ≈ 3 × 10⁻⁴ kg/m³), with a 4.7 m nose radius
const q = stagnationHeatFlux(3e-4, 11_000, 4.69);
// q ≈ 1.85 MW/m²

See ​